squier strat elementen afstellen

[VansNL]

hoi

ik heb een vraag mijn elementen wil ik ze afstellen
op hardrock maar de maten hoe hoog die moeten staan en van de burg weet
ik niet ik hoop dat jullie die weten

of anders de standaard hoogte van de elementen


gr VansNL

[snaarplukker]

Van de Fender site.

PICKUPS
Set too high, pickups can cause myriad inexplicable phenomena. Depress all the strings at the last fret. Using a 6" (150 mm) ruler, measure the distance from the bottom of the first and sixth strings to the top of the pole piece. A good rule of thumb is that the distance should be greatest at the sixth-string neck pickup position, and closest at the first-string bridge pickup position. Follow the measurement guidelines in the chart below as starting points. The distance will vary according to the amount of magnetic pull from the pickup.

Bass Side Treble Side
Texas Specials 8/64" (3.6 mm) 6/64" (2.4 mm)
Vintage style 6/64" (2.4 mm) 5/64" (2 mm)
Noiseless™ Series 8/64" (3.6 mm) 6/64" (2.4 mm)
Standard Single-Coil 5/64" (2 mm) 4/64" (1.6 mm)
Humbuckers 4/64" (1.6 mm) 4/64" (1.6 mm)
Lace Sensors As close as desired (allowing for string vibration)


ACTION
Players with a light touch can get away with lower action; others need higher action to avoid rattles. First, check tuning. Using a 6" (150 mm) ruler, measure the distance between bottom of strings and top of the 17th fret. Adjust bridge saddles to the height according to the chart, then re-tune. Experiment with the height until the desired sound and feel is achieved.

Note: For locking tremolo systems, the individual string height is preset. Use the two pivot adjustment screws to achieve the desired overall string height.

Neck Radius String Height
Bass Side Treble Side
7.25"
9.5" to 12"
15" to 17" 5/64" (2 mm)
4/64" (1.6 mm)
4/64" (1.6 mm) 4/64" (1.6 mm)
4/64" (1.6 mm)
3/64" (1.2 mm)

[VansNL]

nice ik heb hem wel goed af kunnen stellen


bedankt